Hanssens And Co

Designed and created by Claude Hanssens

Introduction

CH Lab has been created as an add-on for the Major Matt Mason (by Mattel). The scale is about 1/12.

CH Lab is a set of PDF files.

Each file contains a module (see below).

All the parts needed to build a module are in one file.

The selected file must be printed. The part must be cut, folded and glued.

Three main possibilities

CH Lab can be built in 3 different ways:

1. Included in the MMM Space Station, at the ground level.
2. Included in the MMM Space Station, at the first level.
3. As a separate construction.

Following your choice, you can only build some modules. Other modules are not adapted. Following your choice, you will have to build and add some parts (or not).

Instructions

Download

Description of the modules

Wall - Base 1 - Download

It is a basic wall for general purpose. It is decorated with 4 squares on each side (outer and inner).

Wall - Base 2 - Download

It is a basic wall for general purpose. It is decorated with 2 big rectangles on each side (outer and inner).

Wall - Window - Download

It is a basic wall with a window for general purpose.

Wall - Door - Download

It is a basic wall with a door. The door opens and closes.

Wall - Base - Column - Panel Right - Download

It is a part designed only to be included in the Space Station. It leaves space for the red column that support the upper floor.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Base 1 or Wall – Base 2.

It contains a panel on the right side of the wall, the red column being on the left side.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Wall - Base - Column - Panel Left - Download

It is a part designed only to be included in the Space Station. It leaves space for the red column that support the upper floor.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Base 1 or Wall – Base 2.

It contains a panel on the left side of the wall, the red column being on the right side.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Wall - Base – No Column - Panel - Download

It is a part designed for a separate construction only.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Base 1 or Wall – Base 2.

It contains a panel.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Wall - Window - Column - Panel Right - Download

It is a part designed only to be included in the Space Station. It leaves space for the red column that support the upper floor.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Window.

It contains a panel on the right side of the wall, the red column being on the left side. The upper part of the wall is a window.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Wall - Window - Column - Panel Left - Download

It is a part designed only to be included in the Space Station. It leaves space for the red column that support the upper floor.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Window.

It contains a panel on the left side of the wall, the red column being on the right side. The upper part of the wall is a window.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Wall - Window – No Column - Panel - Download

It is a part designed for a separate construction only.

This module contains only the inner part of the wall. You must use the outer part from the module Wall – Window.

It contains a panel. The upper part of the wall is a window.

You can add gauges from the file Panel - Gauges on the panel or on the wall.

Panel - Gauges - Download

It contains gauges, displays, …

You can add those gauges to the panels from the file that contains a Panel.

Floor - Column - Left - Download

It is a part designed only to be included in the Space Station at the first level. It leaves space for the red column that support the upper floor.

It contains a floor for the CH Lab, the red column being on the right side.

This module contains one slice (1/6) of the floor.

Floor - Column - Right - Download

It is a part designed only to be included in the Space Station at the first level. It leaves space for the red column that support the upper floor.

It contains a floor for the CH Lab, the red column being on the left side.

This module contains one slice (1/6) of the floor.

Floor – No Column - Download

It is a part designed to be included in the Space Station at the ground level or for a separate construction.

It contains a floor for the CH Lab.

This module contains one slice (1/6) of the floor.

Ceiling - Download

It is a part designed for a separate construction only.

It contains a ceiling for the CH Lab.

This module contains one slice (1/6) of the Ceiling.

Divider - Base - Download

This part can be used in the Space Station or on a separate construction. It must be used with a floor.

It contains a divider for the CH Lab, dividing from the external wall till the center.

This module contains one divider.

Divider - Window - Download

This part can be used in the Space Station or on a separate construction. It must be used with a floor.

It contains a divider for the CH Lab with a window, dividing from the external wall till the center.

This module contains one divider.

Divider - Door - Download

This part can be used in the Space Station or on a separate construction. It must be used with a floor.

It contains a divider for the CH Lab with a door, dividing from the external wall till the center.

This module contains one divider.

Required parts or modules

For a build in the Space Station, at the ground level

For each wall, you need to build also the corresponding Floor.

For each wall, you need to build and glue the tenons.

For a build in the Space Station, at the first level

For each wall, you need to build and glue the tenons.

In each wall, you need to cut out the mortises.

For a separate construction

For a separate construction, you need at least 2 (better 3) Floor, Wall and Ceiling so that the construction stay upright.

You don't need nor to build the tenon, nor to cut out the mortise.